The Fluke T5 Electrical Testers let you check voltage, continuity and current with one compact tool. With the T5, all you have to do is select volts, ohms, or current and the tester does the rest. OpenJaw™ current lets you check current up to 100A - without breaking the circuit. Its tough test leads stow neatly in the back of the tester, making it easy to tote the T5 in your tool pouch. Detachable SlimReach™ test probes are customized for national electrical standards. The test leads accept optional accessories such as clips and specialty probes. The optional H5 holster lets you clip the T5 onto your belt.
Automatically measures volts ac and volts dc with precise digital resolution
Displays resistance to 1000Ω
Easy and accurate OpenJaw™ current measurement
Continuity beeper
Compact design with neat probe storage
Rugged enough to withstand a 10-foot (3m) drop
Detachable SlimReach™ probe tips are customized for national electrical standards
Test leads accept Fluke accessory test clips
600V model
Can stay connected much longer than solenoid type tester
Auto off mode to conserve battery life
Optional holster attaches to a belt and neatly stows test leads
AC current
Display hold
Safety Conformance
All inputs of the T5-600 are protected to EN61010-1 CAT III 600V. UL, CSA and VDE listed.
Specifications
Jaw opening
12.9 mm (0.5 in)
Max wire size
1/0 THHN Cable
Current range ac rms
0 to 100.0 A
Accuracy ac current (50/60 Hz)
3 % ± 3 counts
AC Response
Averaging
Voltage range ac
0 to 600 V
Accuracy ac voltage
1.5 % ± 2 counts
Voltage range dc
0 to 600 V
Accuracy dc voltage
1 % ± 1 count
Resistance range
0 to 1000 Ω
Continuity beeper threshold
On at <25 Ω, off at >400 Ω
Volts indicator LED threshold
Guaranteed on by 30 V ac
Environmental Specifications
Operating Temperature
-10 °C to 50 °C
Storage Temperature
-30 °C to 60 °C
Humidity (Without Condensation)
0 % to 95 % (5 °C to 30 °C); 0 % to 75 % (30 °C to 40 °C);
0 % to 45 % (40 °C to 50 °C)
Dust/water resistance
Yes
Operating Altitude
2000 meters max
Temperature Coefficient
0.1 x (specified accuracy)/°C (<18 °C or >28 °C)
Safety Specifications
Overvoltage category
CAT III 600 V ac/dc (EN61010-1)
Agency Approvals
UL, CSA, and VDE
Maximum voltage
Between any terminal and earth ground
Mechanical and General Specifications
Size
30.5 mm x 51 mm x 203 mm
Weight
300g
Warranty
Two-years
Battery Life
200 hour zinc chloride, 400 hour alkaline
Battery type
2 x AA
Low battery indicator
Yes
Current sensor opening
12.9 mm
Calibration cycle
1 year
Test leads
Type:
Heavy duty, flexible leads rated for 1000V use.
Field replaceable leads terminate in male shrouded banana plugs
